How To

Unclog Your Toilet Without a Plunger (It’s Way Easier Than You Think)

0


This story is part of Home Tips, CNET’s collection of practical advice for getting the most out of your home, inside and out.

Clogged toilet? Put down that plunger. It’s possible to fix it while avoiding all of the gross drips and splashes that come with attempting to do so with a plunger — and it’s a better, cleaner, easier way. 

We’ll walk you through a method to unclog a toilet that’s not only less gross, but also more effective. Instead of fetching a bacteria-riddled plunger, simply grab some dish soap, hot water and a bucket — then let chemistry take it from there. Yes, the plunger-free approach is really that easy! Here’s how to make it happen.

(For additional useful tips, here’s how to kill mold in your washing machine, how to clean your mattress, and how to clean a cast-iron skillet the right way.)

Read more: Best Showerhead for 2022

Most clogged toilets can be cleared with soap, hot water and time.


Dale Smith/CNET

Everything you need is likely right in your bathroom

Again, you’ll need just three supplies that can be found in almost any bathroom: soap, hot water and a vessel for transferring water to the toilet bowl. Dish soap, hot bathwater and a 5-gallon bucket work best, but if secrecy is paramount and leaving the lavatory would blow your cover, a few pumps from a hand soap dispenser and some hot sink water in a small plastic waste bin will do just fine.

CNET Home Tips logo

First, get the water in the sink or tub running hot — like, as hot as it will get. Don’t outdo yourself — no need to boil any water. At those temperatures, you could crack the porcelain or worse, injure yourself. Just let the tap water get as hot as it can and you’ll be within range.

While you’re waiting for hot water, go ahead and clear everything off the floor — scales, bathmats… pets. You’re going to be very careful to avoid any spills, of course, but better to be safe than soggy.

Let chemistry do the work, but be careful

Your objective is to get the liquid in the toilet bowl as hot and soapy as possible, as fast as possible, without letting it overflow. This is the step that requires the most finesse.

If you’ve already tried to flush the clog down a second time and the toilet bowl is positively brimming, add the soap directly to the toilet and then pour in as much hot water as you can — if you can.

If you’ve got plenty of clearance, however, go ahead and mix up the soap and water first, then pour the soapy brew into the bowl as swiftly as you can. In a perfect storm, the heat and soap will lubricate the clog while the force of the water will push it through. That said, hopefully your reflexes are quick, because you may need to abruptly stop pouring if the clog doesn’t immediately dislodge. 

A note on the soap: You really can’t overdo the soap at this point. You’re not going to agitate the solution all that much, so the bowl likely won’t erupt in a suds volcano should you go overboard with it. I’m not saying you have to pour the whole bottle of soap in there, but I’m also not saying you shouldn’t. Catch my drift?

dish soap and waste bin

Dish soap works best, but in a pinch hand soap will do just fine. Then you just need hot water and something to put it into the toilet with, like a small waste bin.


Dale Smith/CNET

Don’t stir the toilet bowl, no matter what

Whatever you do, you don’t need to stir it up to get the hot, soapy water blended in with the cold, dirty water that was there first. Science is going to take care of that for you via a process called osmosis. If the clog doesn’t budge after your soap-water tsunami, your next move is simply to be patient. 

Most toilet backups aren’t 100% blocked, so there’s a good chance yours will drain slowly at first. Keep an eye on the water level and, as it drops, continue to add more hot water to keep it full. If the clog isn’t too stubborn, the added pressure of a full toilet bowl plus the lubricating quality of the soap should help usher the backed-up matter through pretty quickly.

waste bin with water

Many bathroom waste bins are small enough to fit under the sink, but if yours is not you can use the tub or shower faucet.


Dale Smith/CNET

If all else fails, just give it more time

The worst-case scenario is that the clog is wedged too tightly in place and the above steps don’t push it down right away. If that happens, you don’t have to call a plumber or head to the hardware store just yet. 

Try giving it some time to let that hot soapy water work on breaking up the clog. Walk away, close the bathroom door, and wait 30 to 60 minutes before you check on it again. When you do, you may be pleasantly surprised to find your problem has disappeared down the drain.

That may mean blowing your cover if you’ve been trying to unclog the toilet incognito. In that case, the best you can hope for is to not become the butt of any future jokes. 

Good luck with that, too.

More cleaning tips for you


#Unclog #Toilet #Plunger #Easier

routershake

Amazon Routinely Hired Dangerous Trucking Companies, With Deadly Consequences

Previous article

Singtel Arm Pastel Sells 1.59 Percent Stake in Bharti Airtel for Nearly Rs. 7,300 Crore

Next article

You may also like

Comments

Leave a reply

Your email address will not be published.

More in How To